Guitar Parts & Pickups

Single ring. Replacement color-correct Keystone (tulip) press-on button for Kluson® tuning machines. Correct for vintage applications. Sold individually. See P-GKLU-SLNDR for double ring.

Original Fender pre-slotted bone nut for Teles and Strats.

Fender® Stratocaster string guides (2 pack)
String guides are also known as string trees or string retainers.

Original, made in USA, covers for open-style tele neck pickups. These premium tele covers are made of nickel silver.

This set of string guides includes the Gotoh RG15 and RG30 for string retention with a staggered height. One guide has a height of 2.5mm and the other has a height of 5mm achieved by using different sized standoffs. These string guides are a modern style machined metal with improved tuning stability. Mounting screws are included. String guides are also referred to as string trees or string retainers.

Fender® replacement pre-cut vintage fret wire. Pre-radiused to 7.25"
Features:
24 vintage-style pre-cut frets for guitar fingerboards
Pre-radiused to 7.25"
Each piece .039" tall and .084 wide

Round back cover for Gibson® Les Paul® switch cavities. These switch covers are made of single-ply material with three mounting holes and a foil backing.

Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.

Genuine Fender replacement knob cap for S-1 switch, which can be retrofitted to nearly any U.S.- and Mexico-made Stratocaster manufactured from 1954-present.
Direct Replacement for P-K358X

Replacement pickguard for Fender® Standard Stratocaster models. These pickguards have eleven mounting holes and are cut for the classic strat configuration. Fits most American and Mexican Standard Stratocasters®. Features:

• 3-ply / 2.5mm thickness
• 11 mounting holes
• Shielding over electronics cavity
• Fits 3/8" bushing pots
• Various colors available

Genuine Fender® chrome bridge cover plate for vintage style Telecaster bridges. This cover is made of stamped steel and finished with chrome just like the originals from the 1950s were made. These will fit most standard spec, three saddle, ashtray type bridges.
Features:

• Genuine Fender plated-steel bridge cover
• Introduced on 1950 Esquire® guitar
• Fits most left- or right-handed Telecaster guitars equipped with a vintage-style three-saddle bridge

Machine heads without a sealed gear are criticized for not having the same smooth performance, efficiency and durability that sealed gear tuners have. The SD series solves these problems by combining "Rock-solid" technology and the post collar or: "Self-Center Guide", found on enclosed gears in the base plate of the gear allowing the post to perfectly align itself with the bushing which attaches the gear to the headstock. The SD series uses a torque balancer to ensure steady rotation of the tuner button giving high quality sound performance as well as great functionality. Through its use of the ideal materials selected for each component part you also obtain a far superior sound. Mounting hardware included.

Fits most American Telecasters. This modern pickguard fits American, American Standard, American Deluxe, American Special, Highway One™, Road Worn®, Deluxe Player, Blacktop, Standard and Deluxe series Telecaster guitars (also fits Squier® Standard series Telecaster models 2004-present).

Gretsch® Original Filtertron Pickup Ring, for bridge or neck.

Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have a 53mm spacing.

Made in U.S. modern-spec tune-o-matic bridge with no retaining wire. This bridge is fully plated and comes with pre-slotted saddles. Mounting hardware sold separately. For a full set with all hardware included, please see P-GKLU-KLP120XC. This Nashville bridge is a great upgrade that features wider intonation adjustments and a larger mass for better tone and sustain.

• Post spacing: 2.93 inches (74.5mm)
• Radius: 12 inches (30.48cm)
• String Spacing: 10.4 mm
• For use with 4.95mm stud posts

Three-ply Telecaster® style pickguards with 8 mounting holes. This pickguard has no pickup mounting holes for use with neck pickups that mount directly to the guitar’s body. All mounting holes are countersunk.

Original Fender® pickup cover for vintage P-Bass, chrome.
Features:

• True vintage specifications
• Fits American Vintage, Road Worn and Classic Series basses
• Will not fit five-string basses
• Mounting hardware not included

Kluson Pearloid Button Tuners, 3 Per Side, Pearl. Complete set with both bass and treble side individual tuning machines. Includes bushings and mounting screws. Historically correct replacement for many '50s and '60s Gibson®, Martin® and Epiphone® guitars. Used on a Les Paul / SG Standard Historically used on:

• 1958 - 1959 Gibson® Flying V
• 1958 - 1959 Gibson® ES-345
• 1956 - 1959 Gibson® ES-295
• 1956 - 1959 Gibson® J-200
• 1956 - 1959 Gibson® ES-350
• 1956 - 1959 ES-5
• 1957 Gibson Explorer Prototype Futura
• 1959 Epiphone Crestwood Deluxe

High quality press fit bushings for vintage style tuners. These bushings are plated in nickel. Sold individually.

• Inner Diameter: 0.240 in.
• Outer Diameter: 0.355 in.
• Height: 0.388 in.

Chrome-plated steel bridge plate for use on American Vintage, Classic and Road Worn® series Telecaster® models.

• String-through-body three-saddle design
• Mounting hardware and bridge saddles not included

The Gotoh "Relic" series is purposefully designed to give an "aged" or "vintage" look to your guitar. 2 pieces per set, screws included.

Genuine Fender chrome hard-tail bridge assembly for use on Classic and Pawn Shop series instruments. Includes six stamped saddles, intonation screws and springs, and saddle-height adjustment screws.

• String-through-body design
• Mounting hardware not included
• 2-7/32" String Spacing

Phillips flathead machine screw, 10-32 stainless steel. Fine thread. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. This style head is used in applications where protrusion of the fastener above the mating surface is unacceptable. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head. Made from austenitic stainless steels. It contains chromium creating an invisible surface film that resists oxidation making the metal corrosion resistant. If the surface layer is damaged, it rebuilds itself in the presence of oxygen.